Id Check Transmission - Oki CX2731MFP Advance User Manual

ID Check Transmission

This function checks and matches the last four digits of the
destination numbers with those registered in the destination MFP. If
this function is enabled, the MFP will transmit faxes only when they
match.
Note
• If the destination MFP has no registered fax number, the MFP
does not transmit the fax.
• ID check transmission is unavailable when you transmit faxes
manually.
Configuring ID Check Transmission
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Fax Setup], then press
<OK>.
6 Press the down arrow key to select [Security Function], then
press <OK>.
7 Make sure that [ID Check Tx] is selected, then press <OK>.
8 Press the down arrow key to select [ON], then press <OK>.
9 Use the left arrow key to go back to the main screen.
Using ID Check Transmission
1 Place your document with text face up in the ADF or face down
on the document glass.
2 Press the <FAX> key.
MC361/MC561/CX2731 MFP Advanced User's Guide
49
– Faxing: Security Functions