Check Broadcast Destination - Oki CX2731MFP Advance User Manual

3 Make sure that [Fax] is selected and press <OK> to open the fax
standby screen.
4 Make sure that [Add a Destination] is selected, then press <OK>.
5 Specify a destination.
6 Press the <Mono Start> key.

Check Broadcast Destination

When this function is enabled, a fax number confirmation screen is
displayed before transmission starts. By factory default, this function
is enabled.
Note
• The broadcast destination check function is available only when
multiple destinations are specified.
• If [Confirm Dial] is also enabled, it is done first.
• The broadcast destination check function is unavailable when
you transmit faxes manually.
Configuring Broadcast Destination
1 Press the <SETTING> key.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Fax Setup], then press
<OK>.
6 Press the down arrow key to select [Security Function], then
press <OK>.
7 Press the down arrow key to select [Broadcast dest.], then press
<OK>.
8 Press the down arrow key to select [ON], then press <OK>.
MC361/MC561/CX2731 MFP Advanced User's Guide
50
– Faxing: Security Functions