Using Network Configuration - Oki CX2731MFP Advance User Manual

Note
For PC-FAX function, the resolution is fixed to 200 dpi and the
color mode is fixed to black and white.
1 Start ActKey on your computer.
2 Press the <SCAN> key on the control panel of the MFP.
3 Press the down arrow key to select [Remote PC], then press
<OIK>.
4 Place your document with text face up in the ADF or face down
on the document glass.
5 Click "PC-Fax" on your computer.
The "Fax Sending Wizard" starts.
6 Follow the on-screen instructions to send a fax.
Setting the Scan Button
You can change the settings of four scan buttons.
1 Start ActKey.
2 Select "Button settings" from the "Options" menu.
3 Click a button you want to set.
4 Change the settings if necessary.
5 Click "OK".

Using Network Configuration

Network Configuration is a tool to set in advance when executing
Scan To Local PC. In addition, if the information including the device
and IP address of the computer, etc. is changed when performing
network scan, the setting value can be changed by this tool.
When installing ActKey, Network Configuration is also installed
simultaneously.
Network Configuration will be automatically attached to the taskbar
when you restart your computer.
MC361/MC561/CX2731 MFP Advanced User's Guide
86
– Scanning: Drivers and Software