Auto Tray Selection - Oki CX2731MFP Advance User Manual

Note
If the print dialog contains only two menus and does not contain
the options you expect to see for the Mac OS X 10.5 or later, click
the disclosure triangle beside the "Printer" menu.

Auto Tray Selection ___________

You can switch paper feed trays with the same size of paper
configured on the printer driver automatically.
First, set the MP tray to be a target tray for auto selection on the
operator panel. Then, set the auto selection of the tray with the
printer driver.
Note
• Make sure to set a paper size for Tray1, Tray2 (optional) and the
MP tray. Available paper size differs depending on each tray. For
details, see the Basic User's Guide on the DVD supplied with the
MFP.
• In the default settings, the [MP tray Usage] is [Not Used]. In
such a case, the MP tray is not supported by the auto tray
switching function.
• To enter the [Admin Setup] menu, an administrator password is
necessary. The default password is "aaaaaa".
1 Press the <SETTING> key on the operator panel.
2 Press the down arrow key to select [Admin Setup], then press
<OK>.
3 Enter the administrator password.
4 Use the arrow keys to select [Enter], then press <OK>.
5 Press the down arrow key to select [Print Setup], then press
<OK>.
MC361/MC561/CX2731 MFP Advanced User's Guide
119
– Printing: Auto Tray Selection