Loading Postcards
You can feed up to 30 postcards at a time from the
multipurpose feeder. Insert the postcards with the print
surface up. Follow these steps
1.
Push the top of the multipurpose feeder to open it
(A).
2.
Pull out the stopper (B).
3.
Slide the side guide to the far right.
A
C
4. Insert the postcards along the left side of the tray
and under the plastic tab (C).
5. Adjust the side guide to size of the postcards.
6. Adjust the stopper so that it lightly touches the
postcard stack and the postcards lie flat (D).
note:
printed on the side facing up—so load postcards with
the picture side down.
B
D
Using the multipurpose feeder, the text is
Using the Multipurpose Feeder
4–15