Table of Contents
Advertisement
Loading Transparencies and Adhesive Labels
The multipurpose feeder holds up to 30 transparencies
or adhesive labels.
When you are printing on
Transparencies:
transparency film, always remove the first printed
transparency from the output tray before feeding a
second one through. This prevents scratching the
film surface of the first transparency. Only use
transparencies that are designated for laser printers.
Adhesive labels should be fed
Adhesive Labels:
manually through the multipurpose feeder.
Adhesive labels consist of a top (print surface)
sheet, an adhesive layer, and a liner (peel-away
backing). Use labels that cover the entire surface of
the liner sheet. Labels placed on a liner sheet with
interrupting spaces make it difficult for consistent
feeding. See Appendix B for further specifications
before printing on adhesive labels.
note:
Using the multipurpose feeder, the image is
printed on the side facing up—so load adhesive labels
with the label side up, liner side down.
4–14
User's Guide
You load transparencies and labels into
the multipurpose feeder just as you
would load paper. You should fan the
sheets before loading.
Advertisement
Table of Contents
