Loading The 500-Sheet Cassette - NEC SuperScript 1800 User Manual

L T 500-
OADING HE
The 500-sheet Cassette (Tray 2) can hold up to 500 sheets of
medium weight paper—letter size (U.S.), legal, folio or A4.
See Appendix B, "Media Specifications," for a complete list of
paper that can be used.
1. Pull the 500-sheet Cassette tray out of the printer (A).
2. Squeeze the metal plate on the Back Paper Guide and
slide it to the desired paper length. It will click into place
(B). Paper size markings are embossed on the inside
bottom of the tray.
A
note:
The 500-sheet Cassette
will be referred to as Tray 2 in the
printer driver and Operator Panel.
D
Lever
C
SHEET ASSETTE
E
3. Pinch the top of the Right Corner Guide, lift slightly, and
slide the guide to the width of your paper (C). Paper size
widths are embossed on top of the Back Paper Guide.
4. To load legal or folio size paper, make sure the lever on
the front left side of the cassette is locked (D). If it is not
all the way down as shown, pull the lever out slightly
and snap it into the small hole under the slot.
5. Push down metal plate in bottom of tray (E).
6. Load the paper stack against the back left corner of the
cassette tray (F). Directions continued on next page.
B
Back Paper Guide
C
Print-side down
F

Loading The 500-sheet Cassette

11