Loading the 500-Sheet Paper Cassette
You can select the 500-sheet feeder as the paper source
using the operator panel menu tree or the print driver
software on your computer. The 500-sheet feeder will
not be available for selection unless it is properly
installed on the printer.
Instructions for installing and removing the 500-sheet
feeder are provided in Chapter 2 of the Easy Printer
Setup Guide.
Caution!
Only use the 500-sheet cassette in the
500-sheet feeder.
1
4–8
User's Guide
Follow these steps to load paper in the 500-sheet
cassette.
1. Remove the 500-sheet paper cassette from the
2. Press down on the bottom plate until it snaps into
3. Insert the stack of paper along the left side of the
4. If necessary, slide the side guide in to the left so that
5. Reinstall the paper cassette into the printer.
2
4
printer.
position.
cassette. Ensure the paper goes underneath the retaining
clips and plastic tab on the end guide.
it lightly touches the edges of the paper stack.
3
5