Table of Contents
Advertisement
Using the Multipurpose Feeder
This section shows different ways to use the
multipurpose feeder. The multipurpose feeder can
automatically feed the following quantities of standard-
sized media.
•
100 sheets of paper
•
10 envelopes
•
30 transparencies
•
30 sheets of adhesive labels
•
30 postcards
You should feed irregular sizes manually.
Caution!
Do not load the multipurpose feeder
before you turn on the printer. Wait until the printer has
warmed up and is ready to print before loading.
4–10
User's Guide
Loading Paper in the Multipurpose Feeder
Follow these steps to load paper into the multipurpose
feeder, as illustrated on the next page.
1. Press the top of multipurpose feeder to open it.
2. Pull out the tray extension to accommodate the size
of the paper you are using.
3. Flip open the extension bar if you are using long
paper.
4. Slide the side guide to the far right.
5. Insert the paper against the left side of the tray and
under the plastic tab.
6. Adjust the side guide to the new paper size.
note:
Using the multipurpose feeder, the page image
is printed first on the paper side facing up. The top of
the page prints on the edge of the paper inserted into the
feeder (in portrait orientation).
Advertisement
Table of Contents
