Deactivating The Print Monitor; Changing Print Monitor Settings; The Silentwriter Uninstaller - NEC 1760 - SilentWriter B/W Laser Printer User Manual

Deactivating the Print Monitor

If you do not want the Print Monitor to appear when
printer errors occur, turn it off using Print Monitor
settings in the Options property sheet of the printer
driver.
note:
To disable the Print Monitor program
(WSWPD.EXE) entirely you must remove the Print
Monitor from the Run command in the WIN.INI file.

Changing Print Monitor Settings

You can control the way the Print Monitor performs
using settings in the NEC Silentwriter 1700 PCL and PS2
printer drivers. Print Monitor settings are located on the
Options property sheet of each driver. Use them to
• Turn the Print Monitor On or Off
• Make the Print Monitor always the active window
when an error occurs
• Make the Print Monitor beep when an error occurs

The Silentwriter Uninstaller

The Silentwriter Uninstaller removes Silentwriter
software from Windows. This includes
• PCL 5e printer driver
• PostScript Level 2 printer driver
• Print Monitor
• Silentwriter program group
• Printer settings in Windows
• References in the WIN.INI and SYSTEM.INI files
The Uninstaller does not remove TrueType fonts or any
DOS printer software.
note:
Use the Uninstaller first if you are going to
reinstall Silentwriter software—especially in Windows
95.
To remove the Windows Silentwriter printer software in
Windows 3.1x, double-click the NEC Silentwriter
Uninstaller in the Silentwriter Printing System program
group.
In Windows 95, press the Start button and point to
Programs in the Start pop-up menu. In the menu that
appears, click Silentwriter Printing System. In that
menu select NEC Silentwriter Uninstaller.
For information on how to install Silentwriter Windows
software, see Chapter 3 of the Easy Printer Setup Guide.
The Silentwriter Uninstaller
The Silentwriter Uninstaller 2–7