Table of Contents
Advertisement
P
T
RINTING ON
RANSPARENCIES
Keep the following considerations in mind before you print
on transparencies:
•
Create the information you need printed on the
transparencies within your application. Try printing on a
plain sheet of paper first for proper placement.
•
You can print transparencies only from the Tray 1
(Manual Feed Tray) one sheet at a time.
note:
Place transparencies on a flat surface after
removing them from the Main Output Tray.
•
Use transparencies in letter or A4 size only.
A
C
Windows 98
40
Chapter 5, Using Print Media
note:
transparencies are fogged,
choose
the printer driver instead
Autoselect
of
note:
transparencies have
scratches on them, try
printing to the Face-up
Output Tray instead of
the Main Output Tray.
Macintosh
•
Transparencies must be able to withstand temperatures
of 392°F (200°C) for at least 0.1 second.
•
Keep the paper path clean. Transparencies are especially
sensitive to dirt. If shadows appear on the sheets, clean
the inside of the printer. See page 63.
1. Open Tray 1 (Manual Feed Tray) (A).
2. Load a transparency (B). Properly adjust the Width
Guide.
3.
Configure the paper source, type, and size within your
software application (C).
4.
Print to the Main Output Tray (D).
If your
Transparency
in
.
If your
D
B
Advertisement
Table of Contents
