Table of Contents
Advertisement
Implication: The VMX-preemption timer may cause VM exits at a rate different from that expected
by software.
Workaround:None identified.
Status:
For the steppings affected, see the Summary Tables of Changes.
AAZ59.
Multiple Performance Monitor Interrupts Are Possible on Overflow of
Fixed Counter 0
Problem:
The processor can be configured to issue a PMI (performance monitor interrupt) upon
overflow of the IA32_FIXED_CTR0 MSR (309H). A single PMI should be observed on
overflow of IA32_FIXED_CTR0, however multiple PMIs are observed when this erratum
occurs.
This erratum only occurs when IA32_FIXED_CTR0 overflows and the processor and
counter are configured as follows:
• Intel® Hyper-Threading Technology is enabled
• IA32_FIXED_CTR0 local and global controls are enabled
• IA32_FIXED_CTR0 is set to count events only on its own thread
(IA32_FIXED_CTR_CTRL MSR (38DH) bit [2] = '0)
• PMIs are enabled on IA32_FIXED_CTR0 (IA32_FIXED_CTR_CTRL MSR bit [3] = '1)
• Freeze_on_PMI feature is enabled (IA32_DEBUGCTL MSR (1D9H) bit [12] = '1)
Implication: When this erratum occurs there may be multiple PMIs observed when
IA32_FIXED_CTR0 overflows.
Workaround:Disable the FREEZE_PERFMON_ON_PMI feature in IA32_DEBUGCTL MSR (1D9H) bit
[12].
Status:
For the steppings affected, see the Summary Tables of Changes.
AAZ60.
VM Exits Due to LIDT/LGDT/SIDT/SGDT Do Not Report Correct
Operand Size
Problem:
When a VM exit occurs due to a LIDT, LGDT, SIDT, or SGDT instruction with a 32-bit
operand, bit 11 of the VM-exit instruction information field should be set to 1. Due to
this erratum, this bit is instead cleared to 0 (indicating a 16-bit operand).
Implication: Virtual-machine monitors cannot rely on bit 11 of the VM-exit instruction information
field to determine the operand size of the instruction causing the VM exit.
Workaround:Virtual Machine Monitor software may decode the instruction to determine operand
size.
Status:
For the steppings affected, see the Summary Tables of Changes.
AAZ61.
DPRSLPVR Signal May Be Incorrectly Asserted on Transition between
Low Power C-states
Problem:
On entry to or exit from package C6 states, DPRSLPVR (Deeper Sleep Voltage
Regulator) signal may be incorrectly asserted.
Implication: Due to this erratum, platform voltage regulator may shutdown
Workaround:It is possible for the BIOS to contain a workaround for this erratum.
Status:
For the steppings affected, see the Summary Tables of Changes.
32
Errata
Specification Update
Advertisement
Table of Contents
