Table of Contents
Advertisement
Table 5.
Processor Absolute Maximum Ratings
Symbol
T
STORAGE
V
CC
V
inAGTL+
V
inAsynch_CMOS
NOTES:
1.
For functional operation, all processor electrical, signal quality, mechanical and thermal
specifications must be met.
2.
Storage temperature is applicable to storage conditions only. In this scenario, the
processor must not receive a clock, and no lands can be connected to a voltage bias.
Storage within these limits does not affect the long-term reliability of the device. For
functional operation, please refer to the processor case temperature specifications.
3.
This rating applies to the processor and does not include any tray or packaging.
4.
Failure to adhere to this specification can affect the long term reliability of the processor.
3.10
Processor DC Specifications
The processor DC specifications in this section are defined at the processor
core (pads) unless noted otherwise. See
signal pin assignments. Most of the signals on the FSB are in the AGTL+ signal group.
The DC specifications for these signals are listed in
CMOS group are listed in
Table 6
through
specifications for junction temperature, clock frequency, and input voltages. Active
mode load line specifications apply in all states except in the Deep Sleep state.
V
CC,BOOT
set the VID values. Unless specified otherwise, all specifications are at Tjunction =
100°C. Care should be taken to read all notes associated with each parameter.
Table 6.
DC Voltage and Current Specifications
Symbol
V
V
of the Processor Core
CC
CC
V
Default V
CC,BOOT
CC
V
AGTL+ Termination Voltage
CCP
V
PLL Supply Voltage
CCA
I
for processors
CC
I
CCDES
Recommended Design Targets:
24
Parameter
Processor storage
temperature
Any processor supply voltage
with respect to V
SS
AGTL+ buffer DC input
voltage with respect to V
CMOS buffer DC input
voltage with respect to V
Table
9.
Table 10
list the DC specifications and are valid only while meeting
is the default voltage driven by the voltage regulator at power up in order to
Parameter
Voltage for Initial Power Up
Min
-40
-0.3
-0.1
SS
-0.1
SS
Table 4
for the pin signal definitions and
Table
8. DC specifications for the
Min
Typ
0.95
1.15
1.20
1.00
1.05
1.425
1.5
Electrical Specifications
Max
Unit
Notes
85
°C
2, 3, 4
1.55
V
1.55
V
1.55
V
Max
Unit
Notes
1.30
V
1, 2
V
2, 8
1.10
V
1.575
V
36
A
5
Datasheet
1
Advertisement
Table of Contents
