Displaying Snmp Status - Cisco 2950G 24 - Catalyst Switch Software Configuration Manual

Chapter 24 Configuring SNMP

Displaying SNMP Status

To display SNMP input and output statistics, including the number of illegal community string entries,
errors, and requested variables, use the show snmp privileged EXEC command. You can also use the
other privileged EXEC commands in
the fields in the output displays, refer to the Cisco IOS Configuration Fundamentals Command
Reference for Release 12.1.
Table 24-5 Commands for Displaying SNMP Information
Feature
show snmp
show snmp engineID [local | remote]
show snmp group
show snmp user
78-14982-01
Table 24-5 to display SNMP information. For information about
Default Setting
Displays SNMP statistics.
Displays information on the local SNMP engine and all
remote engines that have been configured on the device.
Displays information on each SNMP group on the network.
Displays information on each SNMP user name in the
SNMP users table.
Catalyst 2950 Desktop Switch Software Configuration Guide
Displaying SNMP Status
24-15