Power Supply Features; Management Options - Cisco IE 4010 Hardware Installation Manual

Product Overview
REDUN
SYNCE
PoE
DISPLAY MODE
For more information about these LEDs, see

Power Supply Features

The switch has two slots for power-supply modules:
• PWR-RGD-LOW-DC-H: low-voltage DC
• PWR-RGD-AC-DC-H: high-voltage AC or DC
Note:
Caution
The switch supports these power-supply module combinations:
• Single low-voltage DC
• Single high-voltage AC or DC
• Two high-voltage AC or DC
• Two low-voltage DC
• One high-voltage AC or DC and one low-voltage DC
For information on installing the power-supply modules, see
See Power-Supply Module LEDs, on page 10

Management Options

Cisco IOS CLI
• You can configure and monitor the switch from the CLI. Connect your management station to the switch
SNMP network management
• You can manage switches from a Simple Network Management Protocol (SNMP)-compatible management
For detailed specifications, see the
Only the -H version power supplies are certified safe for hazardous environments.
console port or use Telnet from a remote management station. See the switch command reference on
Cisco.com for information.
station. The switch supports a comprehensive set of Management Information Base (MIB) extensions
and four Remote Monitoring (RMON) groups. See the switch software configuration guide on Cisco.com
and the documentation that came with your SNMP application for information.
Redundancy status
Synchronous Ethernet status
PoE status
Display Mode button
Switch Panel LEDs, on page
IE 4010 Data Sheet.
Power Supply Installation, on page
for information on the power supply LEDs.
Cisco IE 4010 Switch Hardware Installation Guide
Power Supply Features
6.
37.
13