Drive Chain Inspection; Drive Chain Installation - DAELIM ROADWIN VJ125 Service Manual

WIPE AND DRY
GEAR OIL(#80-90)
WEAR
DAMAGE
BOLTS BOLTS BOLTS
BOLTS BOLTS BOLTS BOLTS
BOLTS BOLTS BOLTS BOLTS
BOLTS BOLTS BOLTS BOLTS
BOLTS
OUTSIDE
RETAINER CLIP
NORMAL
DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET
DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET
DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET
DRIVE SPROCKET DRIVE SPROCKET DRIVE SPROCKET
RETAINER CLIP
MASTER LINK
INSPECTIONS / ADJUSTMENTS

DRIVE CHAIN INSPECTION

Lubricate with #80-90 gear oil after removing the
contamination of chain with a cleaner, and drying
fully.
Because an extremely lubricated oil splash while
the chain moves round, clean it with a piece of
cloth.
After checking a wear and damage of the drive
chain, replace it if necessary.
After inspecting an excessive wear and damage of
the drive sprocket, replace it if necessary.
Always replace the chain and sprocket as a set.
Check the attaching bolts and nuts on the drive and
driven sprockets.
If any are loose, torque them.
TORQUE :
DRIVE SPROCKET BOLT : 1.2kgf m(12N m)
DRIVE SPROCKET NUT : 5.9kgf m(59N m)

DRIVE CHAIN INSTALLATION

Install the drive chain.
Install the master link and retainer clip.
When installing the drive chain, it should be installed
in order that the choked part of the clip can direct to
a progressing derection of the chain.
2-9