Maintenance
Drive Chain
NOTE
Stop the engine to inspect the drive chain,
otherwise fingers can be caught in the drive
chain while the drive chain is operating.
Chain Free Play Adjustment
Stop the engine and shaft the gear into neutral,
support the motorcycle on a level surfase.
Remove the chain tensioner.
Move the position of chain tensioner roller up
and down with hands to check if the chain free
play is within recommended range.
Free Play: 50~60mm
If necessary, adjust the drive chain free play.
Adjust by loosening the axle nut and lock nuts
in the right/left chain adjusters and turning the
adjusting nut.
NOTE
Adjust the chain adjuster reading scale into the
same place in the right and left sides.
Tighten the axle nut
Torque: 88kgf-m(88N.m)
Removal/Inspection
Inspect the drive chain for contamination.
3-8
50~60mm
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip
Retainer Clip