Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manual page 95

GhRegEdit display switches
Table 7-2
Switch Description
-ad=image file Mounts the specified vmdk, pqi, v2i, or iv2i image file to GhRegEdit
name ("add" the image as a disk). Once added, the disk can be used in all
normal operations.
-addDisk=image
file name
windows Displays Windows installations.
GhRegEdit looks for a Boot.ini or Msdos.sys file. If it finds one of these
files, it displays the following:
See
on page 83.
Note:
disk:partition.
To access registry files stored in an NTFS partition from within DOS,
you must use the disk.partition notation because NTFS volumes do
not have drive letters assigned in DOS.
Note:
running on Vista, but it is available on WinPE.
help Displays a help file listing command-line switches.
Table 7-3 lists the import and export switches.
GhRegEdit import and export switches
Table 7-3
Switch
import [windowsdir]
filename
Editing registry keys and values using GhRegEdit
The location of the boot.ini or msdos.sys file in the format
disk.partition:\filename
For example: 1.1:\Windows
The Windows installation is located on the first partition of the
first disk.
Operating systems to which the file points
"Accessing files and folders with names that contain spaces"
The format for displaying in GhRegEdit is disk.partition, not
The windows switch is not available on GhRegEdit32 when
Description
Imports a registry import file as follows:
Windowsdir is the location of the Windows directory
For example, 1.1:\Windows.
Filename is the name and location of the .reg file.
95
Using GhRegEdit