Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manual page 120

120 GhostCasting from the command line
GhostCast Server command-line options
Summary
Creating an image file of a
partition from a client computer
to an image file
Restoring a disk image file onto
client computers
Restoring a specific partition
from an image file onto client
computers
GhostCasting a specific partition
from an image file to a specific
partition on a destination drive
GhostCast Server command-line examples (continued)
Table 9-2
Syntax
ghostsrv c:\test123.gho TestSession -d -p
ghostsrv.exe c:\test123.gho TestSession
ghostsrv c:\test123.gho TestSession -p2
ghostsrv c:\test123.gho TestSession -p1
-DISK1-PART2
Description
Starts a GhostCast session called
TestSession and creates or
overwrites the image file c:\
test123.gho. The first connecting
client's IP address appears
on-screen, and the session starts
automatically. The client computer
indicates the source drive and
partitions to include in the image
created.
Starts a GhostCast session called
TestSession and uses the image file
c:\test123.gho. The connecting
clients' IP addresses appear
on-screen. Start the session
transmission.
See "Starting a GhostCast session"
on page 104.
Starts a GhostCast session called
TestSession and uses the second
partition in the image file c:\
test123.gho. The connecting clients'
IP addresses appear on-screen.
Starts a GhostCast session called
TestSession, uses the first partition
in the image file c:\test123.gho, and
places it in the second partition of
the clients' first disk. The
connecting clients' IP addresses
appear on-screen. Start the
GhostCast transmission.
See "Starting a GhostCast session"
on page 104.