Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manual page 155

Table B-9
Switch
ghost.exe -lpm
-clone,mode=create,src=2,dst=c:\drive2.gho
ghost.exe -clone,mode=pcopy,src=1:2,dst=2:1
-sure
ghost.exe -clone,mode=restore,src=e:\
savedsk.gho,dst=1 -sure
ghost.exe -clone,mode=pcreate,src=1:2,dst=g:\
part2.gho
ghost -clone,mode=prestore,src=g:\
part2.gho:2,dst=1:2
ghost.exe -clone,mode=restore,src=g:\
3prtdisk.gho,dst=2,sze1=60P,sze2=20P
ghost.exe -clone,mode=copy,src=1,dst=2,sze2=F
ghost.exe -clone,mode=create,src=1,dst=2:3\
image.gho
ghost.exe -clone,mode=prestore,src=2:3\
image.gho:5,dst=4:2
ghost.exe-clone,mode=restore,src=g:\
3prtdisk.gho,dst=1,sze1=450M,sze2=1599M,
sze3=2047M
ghost.exe -clone,mode=restore,src=g:\
2prtdisk.gho,dst=1,szeL
Clone switch usage examples (continued)
Function
Connects a master computer using LPT to another computer
running Ghost.exe in slave mode and saves a disk image of local
disk two to the remote file c:\drive2.gho. The slave computer can
be started with ghost.exe -lps.
Copies the second partition of local disk one to the first partition
of local disk two without the final warning prompt.
Restores the disk image file Savedsk.gho that is held on the server
drive that is mapped locally to drive E onto local disk one.
Performed without the final warning prompt. This example is
typical of a command line included in a batch file to automate
workstation installations from a network file server.
Saves the second partition of disk one to an image file on mapped
network drive G.
Restores partition two from a two-partition image file on mapped
drive G onto the second partition of the local disk.
Restores disk two from an image file and resizes the destination
partitions into a 60:20:20 allocation, assuming that the image
contains 3 partitions.
Clones a two-partition disk and keeps the second partition on
the destination disk the same size as on the source disk and lets
the first partition use the remaining space, leaving no unallocated
space.
Saves disk one to the image file image.gho located on the third
partition of the second disk.
This works only if the third partition of the second disk is an
NTFS file system.
Restores the fifth partition of the image file image.gho, which is
located on the third partition of the second disk, to the second
partition on the fourth disk. This switch only works if the third
partition on the second disk is NTFS.
Restores disk one from an image file and resizes the first partition
to 450 MB, the second to 1599 MB, and the third to 2047 MB.
Restores a disk from an image file and resizes the last partition
to fill the remaining space.
Command-line switches
Using the clone switch
155