Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manual page 59

Switches common to all GDisk commands
Table 5-2
Switch Explanation
/ad=image file Mounts the specified vmdk, pqi, v2i, or iv2i image file ("add" the image
name as a disk). Once added, the disk can be used in all normal operations.
/addDisk=image
file name
/x Prevents GDisk from using extended disk access support. This may
result in GDisk not being aware of the full capacity of the disk.
/i Prevents GDisk from using direct IDE disk access support. This may
result in GDisk not being aware of the full capacity of the disk.
/s Prevents GDisk from using direct SCSI disk access support. This may
result in GDisk not being aware of the full capacity of the disk.
/y Suppresses prompting to confirm the operation. If you do not use this
switch, you are not necessarily prompted before a partition is deleted
or another possibly destructive operation is executed.
/sure Suppresses prompting to confirm the operation and has the same
functionality as /y.
/r Causes GDisk to restart the computer if the operation is successful.
/u Turns off Ultra Direct Memory Access (UDMA).
This switch works in DOS only.
Managing partitions using GDisk
Overview of the main command-line switches
59