Retargeting The Image; Adding New Drivers To The Ghost Deploy Anywhere Driver Database - Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manual

Retargeting the image

Adding new drivers to the Ghost Deploy Anywhere
driver database
You need to ensure that the missing drivers are available in the DeployAnywhere
driver database, and then run
Wizard to add new drivers to the DeployAnywhere driver database.
If all of the required drivers are available, the evaluation step returns "Success".
To perform the evaluation step, use the following command line:
ghDplyAw32.exe /target=[Windows disk] /eval /ddb=[DeployAnywhere
driver database location]
When the evaluation step has verified that all the necessary drivers are available,
you can retarget the image. The retargeting step installs the appropriate drivers
and performs other necessary configuration tasks.
To perform the retargeting step, use the following command line:
ghDplyAw32.exe /target=[Windows disk] /ddb=[DeployAnywhere driver
database location]
You can add new drivers to the Ghost Deploy Anywhere driver database. The
drivers in the Ghost Deploy Anywhere driver database are available for use by
the Deploy Anywhere feature when retargetting a client computer, and by the
Ghost Boot Wizard when modifying a Win PE version.
Running DeployAnywhere from the command line

Adding new drivers to the Ghost Deploy Anywhere driver database

ghDplyAw32.exe
again. You use the Ghost Boot
53