Symantec GHOST IMAGING FOUNDATION 7.1 - V1.0 Manual page 22

22 Using Symantec Ghost as a stand-alone program
Creating a backup image file
5 In the File Locator dialog box, select the image file destination and name.
6 In the Image file description box, type a description of the image file.
7
Click Save.
8 When you are prompted to select the compression level, select one of the
following:
No
Fast
High
See "Image files and compression"
9 In the Compress Image dialog box, select a compression option.
10 If Ghost detects that there is not enough space for the image file, you are
prompted to enable spanning.
11 In the Proceed with partition image creation? dialog box, do one of the
following:
To proceed with the image file
creation
To return to the menu
12 If spanning is required, do one of the following:
Insert the next media, then click OK.
Click Browse, then select the location of the next span of the image file.
See "Image files and volume spanning"
13 Verify the integrity of the image file when it has been created.
See "Verifying integrity"
For no compression.
For low compression.
For high compression.
on page 34.
Click Yes.
The system performs an integrity check of the file
structure on the source partitions. The source
partitions are then copied to the destination image
file.
If you need to cancel the process, press Ctrl+C, but
be aware that this action leaves the destination image
file in an unknown state.
Click No.
on page 30.
on page 36.