Error Messages On The Display; Messages Without Code Numbers - Ricoh Printer/Fax/Scanner/Copier Aficio 1515 Operating Instructions Manual

Appendix

Error Messages on the Display

This section describes the most common network-related messages that appear
on the display. If a message not described here appears, act according to that
message.

Messages without Code Numbers

Reference
Before turning the main power off, see "Turning On the Power", Copy Refer-
ence.
Message
Ethernet Board Error
Problem:IEEE1394 board
Connect failed:IEEE802.11b
Problem:IEEE802.11b card
Problem:IEEE802.11b board
9
102
Causes
An error has occurred in the
Ethernet board.
An error has occurred in the
IEEE 1394 board.
IEEE 802.11b card was not in-
serted when the machine was
turned on, or it was pulled out
after the machine turned on.
An error has occurred in the
IEEE 802.11b card.
An error has occurred in the
IEEE 802.11b card.
An error has occurred in the
IEEE 802.11b unit.
Solutions
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.
Turn off the main power
switch, and check the card is
installed correctly. If the mes-
sage appears again, contact
your sales or service repre-
sentative.
Turn off the main power
switch, and back on again. If
the message appears again,
contact your sales or service
representative.