Solving Problems - Ricoh Printer/Fax/Scanner/Copier Aficio 1515 Operating Instructions Manual

Troubleshooting

Solving Problems

This table lists some common problems and their solutions.
Problem
Image background appears dirty
when a fax is received at the other end.
Printed or sent image contains spots.
4
Received image is too light.
Message appears blank at the other
end.
You want to cancel a Memory Trans-
mission.
You want to cancel an Immediate
Transmission.
You cannot add any destination in
Group, even though it does not reach
the maximum number.
66
Required Action
Adjust the scan density.
Reference
See p.25 "Image Density (Contrast)"
The Document Feeder (ADF) or exposure glass is dirty,
clean them.
Make sure that ink or eraser is dry before setting the
original.
Reference
See Chapter 5 "Maintaining Your Machine"in the
Copy Reference
Request the sender to increase the image density.
When using moist, rough or processed paper, the
printed image may be partly invisible. Only use recom-
mended paper.
Reference
See Appendix, "Originals" in the Advanced Fea-
tures manual.
When h appears on the display, toner is beginning to
run out. Replace the toner cartridge soon.
Reference
See Chapter 3 "Changing the Toner Cartridge"in
the Copy Reference.
The original was set upside down. Set it properly.
Reference
See p.13 "Setting Originals"
If the original is being stored, press the { { { { Clear/Stop} } } } key.
Reference
See p.19 "Canceling a Memory Transmission"
If the original is being sent, use "Cancel TX/RX" in the
Job Information menu.
Reference
See Chapter 2 "Canceling Transmission or Recep-
tion" in the Advanced Features manual.
Press the { { { { Clear/Stop} } } } key.
Reference
See p.23 "Canceling an Immediate Transmission"
67 destinations have been programmed with the num-
ber keys. Program more numbers with Quick Dials or
Speed Dials.
Reference
See p.49 "Groups"