Error Messages On The Display; Messages Without Code Numbers - Ricoh 7025 Operating Instructions Manual

Error Messages on the Display

This section explains the most common network-related messages that appear
on the display. If a message not shown here appears, follow its instructions.

Messages without Code Numbers

Message
hCannot connect to network
Check IP Address.
hCannot connect to network
Contact administrator.
Ethernet Board Error
hServer communicat. failed
Contact administrator.
Reference
Before turning the main power off, see "Turning On the Power", About this
Machine.
Causes
Network connection could
not be established.
Network connection could
not be established.
An Ethernet board error has
occurred.
Cannot communicate with the
server.
Error Messages on the Display
Solutions
Check the machine's IP ad-
dress.
Check the network. If this
message continues to appear,
contact your Administrator.
Turn off the main power
switch, wait a few seconds,
and then turn it back on. If this
message continues to appear,
contact your sales or service
representative.
Check the server. If this mes-
sage continues to appear, con-
tact your Administrator.
4
15