Ricoh Printer/Fax/Scanner/Copier Aficio 1515 Operating Instructions Manual page 630

Using the Printer Function
Limitation
❒ Enter up to 32 alphanumeric
characters ("-" and "_" can
be used).
E In the [NDS Context:] box, enter
the context in which the print
server is to be created.
Limitation
❒ Enter up to 127 alphanumer-
ic characters.
F In the [Print Server Operation
Mode] area, click [As Remote
Printer].
G In the [Remote Printer No.] box,
enter the number of the print-
er.
5
Important
❒ Use the same number as that
of the printer to be created in
the print server (
H Click [OK] to close the [NIB Set-
up Tool - Network board list] dialog
box.
H H H H
Quit SmartDeviceMonitor
Admin.
I I I I
On Windows, start NWadmin.
Reference
For more information about
NWadmin, see the operating in-
structions that come with the
NetWare.
J J J J
Create a print queue as follows:
Note
❒ If you are using a currently de-
fined print queue, proceed to
K
step
A Select the container object the
print queue is located in from
those in the directory tree, and
then click [Create] on the [Ob-
ject] menu.
60
N
-D.)
.
B In the [Class of new object] box,
click [Print Queue], and then
click [OK].
C In the [Print Queue name] box,
enter the name of the print
queue.
D In the [Print Queue Volume] box,
click [Browse].
E In the [Available objects] box,
click the volume in which the
print queue is created, and
then click [OK].
F After checking the settings,
click [Create].
K K K K
Create a printer as follows:
A Select the container object
where the printer is located,
and then click [Create] on the
[Object] menu.
B In the [Class of new object] box,
click [Printer], and then click
[OK]. If you are using NetWare
5/5.1, 6 , click [Printer (Non
NDPS)].
C In the [Printer name] box, enter
for
the name of the printer.
D Select the [Define additional prop-
erties] check box, and then click
[Create].
L L L L
Assign print queues to the created
printer as follows:
A Click [Assignments], and then
click [Add] in the [Assignments]
area.
B In the [Available objects] box,
click the queue created in step
K K K K
, and then click [OK].
C Click [Configuration], and in the
[Printer type] list, click [Parallel],
and then click [Communication].
D In the [Communication type] area,
click [Manual load], and then
click [OK].