Installing Software; Auto Run Program - Ricoh Printer/Fax/Scanner/Copier Aficio 1515 Operating Instructions Manual

Preparations for Use as a Network Scanner

Installing Software

The machine comes with three CD-ROMs containing various software.
The CD-ROM labeled "Scanner Driver & Document Management Utilities" con-
tains the necessary software to use the machine as a network scanner. The CD-
ROM labeled "Printer Driver & Utilities" contains the necessary software to use
the machine as a printer.
2
This section explains the software to use the machine as a network scanner.

Auto Run Program

When the CD-ROM is inserted into a client computer in Windows
95/98/Me/2000/XP, or Windows NT 4.0, the installer starts automatically (Au-
to Run) to install the TWAIN driver and various software.
Note
❒ Auto Run might not automatically work with certain operating system set-
tings. In this case, launch "Set up.exe" located in the CD-ROM root directory.
❒ If you want to install the software without using Auto Run, hold down the
{ { { { Shift} } } } key while inserting the CD-ROM. Keep the { { { { Shift} } } } key held down until
the client computer has finished accessing the CD-ROM.
❒ If [Cancel] is pressed during installation, the installation will be stopped and
all the remaining software will not be installed. If [Cancel] has been pressed,
reinstall the remaining software after restarting the client computer.
Limitation
❒ For installation in Windows 2000/XP, or Windows NT 4.0, log in as a member
of the administrators group.
16