Configuring Remote Installation Services; Set User Permissions On The Active Directory Server - HP T5730 - Compaq Thin Client Troubleshooting Manual

6. Click Authorize.
7. Type the IP address of your RIS PXE server and click OK.
8. Click OK.
9. Log off from the DHCP Server.

Configuring Remote Installation Services

Use the default option to have RIS install on second hard drive (D:\ or E:\).
1. Click Start > Run.
2. Type Risetup.exe and click Next.
3. Click Next.
4. Select Respond to client computers requesting service.
5. Click Next.
6. Insert the Windows 2000 Professional CD into the CD-ROM drive and enter the path to the CD-
ROM drive (usually drive D:\ or E:\).
7. Click Next.
8. Click Next.
9. Click Next.
10. When the installation is complete, click Finish.

Set User Permissions on the Active Directory Server

On the active directory server:
1. Click Start > Programs > Administrative Tools.
2. Click Active Directory Users and Computers.
3. Right-click on the appropriate domain name
4. Click Delegate Control.
5. Click Next.
6. Click Add to add users.
7. Highlight Everyone and click Add.
8. Click OK.
9. Click Next.
10. Select Join a Computer to the Domain.
36 Appendix C Configuring a PXE Server