Table of Contents
Advertisement
SS displays the status of the system processors and which processor is the monarch.
The iLO 2 MP learns the system configuration through the events it receives from the system.
There is usually a delay between any processor configuration change and what is displayed by
this command. For the most up-to-date processor configuration information, use the EFI or BCH
prompt.
Command line usage and scripting:
SS [ -nc ]
-?
See also: PS
SYSREV: Firmware revisions
Command access level: Login access
SYSREV displays the current firmware revisions in the system.
Command line usage and scripting:
SYSREV [ -nc ]
-?
Example:
MP:CM> SYSREV
Current firmware revisions
MP
FW
BMC FW
EFI FW
System FW : 01.40
PDH FW
UCIO FW
PRS FW
TC: System reset through INIT or TOC signal
Command access level: MP configuration access
NOTE:
During normal operation, shut down the OS before issuing this command.
TC resets the system through the INIT or TOC signal. Running this command irrecoverably halts
all system processing and I/O activity and restarts the computer system. It is different from the
RS command in that the processors are signaled to dump state as they shut down.
Command line usage and scripting:
TC [ -nc ]
-?
See also: RS
TE: Send a message to other mirroring terminals
Command access level: MP configuration access
TE treats all displayable characters following the command as a comment. Characters typed are
broadcast to the connected console clients when you press Enter. The string size is limited to 80
characters. Any extra characters are not broadcast to other console clients.
NOTE:
The broadcast message is sent only to Command Menu clients, and does not include
users connected to MP Main Menu functions.
Command line usage and scripting:
: F.01.57
: 75.12
: ROM A 05.63, ROM B 05.60
: 00.0d
: 03.0a
: 00.08 UpSeqRev: 01, DownSeqRev: 01
Text User Interface
79
Advertisement
Table of Contents
