Receiving Faxes Automatically - Konica Minolta bizhub C25 Facsimile Manual

Receiving Faxes Automatically

d
When the machine is turned off, faxes cannot be received. Therefore,
be sure to leave the machine turned on.
d
To print a received fax, change the paper type to Plain Paper and the
paper size to A4, Legal, Letter or 8 1/2 × 13 1/2.
d
If [FAX RX OPERATION]/[DUPLEX PRINT] in the [UTILITY] menu is set
to [ENABLE], a received fax document can be printed on both sides
of the paper. For details, refer to "FAX RX OPERATION Menu" on
page 2-22.
If the [RX MODE] parameter on the [FAX RX OPERATION] menu is set to
[AUTO RX], no special operation is needed in order to receive the fax.
Reception begins after the specified number of rings.
d
If the [RX MODE] parameter on the [FAX RX OPERATION] menu is set
[MANUAL RX], the fax is not received automatically. For details, refer
to "FAX RX OPERATION Menu" on page 2-22.
d
If [MEMORY RX MODE] function is set to [ON], printing does not
begin automatically after the fax is received. A received document is
saved in memory and is printed at the time specified for [MEMORY
RX MODE] function. In addition, if [MEMORY RX MODE] function is
set to [OFF], the fax is printed. For details on [MEMORY RX MODE]
function in the [UTILITY] menu, refer to "FAX RX OPERATION Menu"
on page 2-22. For details on specifying the settings for [MEMORY RX
MODE] function, refer to "Setting Up the Memory RX Mode" on
page 2-29.
5-2 Receiving Faxes Automatically