Sending A Fax Manually Using The On Hook Key - Konica Minolta bizhub C25 Facsimile Manual

Sending a Fax Manually Using the On Hook Key

1
Load the document into the ADF.
d
d
2
If desired, select the image quality.
d
3
Press the On hook key.
4
Specify the fax number of the recipient.
d
d
5
Press the Start key to begin scanning and sending the fax.
d
d
Sending a Fax Manually
When sending a fax manually, load the document into the ADF. An
error will occur if the document is placed on the original glass.
For details on loading the document into the ADF, refer to "Send-
ing a Fax Using the ADF" on page 3-2.
For details, refer to "Selecting the Image Quality" on page 3-7.
The keys for registered destinations can be used even if the On
hook key has been pressed. For details, refer to "Specifying a
Recipient" on page 3-9. (Group dial destinations cannot be speci-
fied.)
If Pulse is selected as the telephone line type, press the
temporarily change the line type to Tone.
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select
[YES], and then press the Select key.
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the Start key.
key to
3-23