Konica Minolta bizhub C25 Facsimile Manual page 32

[DEFAULT TX]
[HEADER]
UTILITY Menu
Settings [MEMORY TX] / [DIRECT TX]
Select the desired method for sending docu-
ments.
- [MEMORY TX]: With this method, the fax
transmission starts after the entire docu-
ment is scanned and stored in the memory.
The total number of pages is automatically
printed with the page number in the header.
However, the memory may become full if
there are many pages in the document or if
the data is large due to the fine image qual-
ity (resolution).
- [DIRECT TX]: With this method, the trans-
mission is performed in real time in the
transmission sequence of the destinations.
If there are many pages in the document,
the fax can be sent with this method without
the memory becoming full.
To change the method for sending documents
during transmission from the default setting
specified here, refer to "Memory Transmission
and Direct Transmission" on page 3-20.
Settings [OFF] / [ON]
Select whether or not to print transmission
source information (date/time of transmission,
sender's name, sender's fax number, session
number and page number) for the machine in
the transmitted document.
d
If [PTT SETTING] in the [USER SETTING]
menu is set to [U.S.A], [CANADA] or
[KOREA], this setting cannot be
changed.
2-21