Setting Up The Memory Rx Mode - Konica Minolta bizhub C25 Facsimile Manual

Setting Up the Memory RX Mode

1
Press the + or , key to select [UTILITY], and then press the Select key.
2
Press the + or , key to select [FAX RX OPERATION], and then press the
Select key.
3
Check that [MEMORY RX MODE] is selected, and then press the Select
key.
4
Using the + or , keys, select [ON], and then press the Select key.
5
Use the keypad to type in the time when memory reception mode begins,
and then press the Select key.
The ending time input box appears.
d
6
Use the keypad to type in the time when memory reception mode ends,
and then press the Select key.
The password input box appears.
7
Enter the password, and then press the Select key.
Memory reception mode is set.
d
d
Specifying Settings in UTILITY Menu
To specify no start time, press the Select key without specifying a
time.The password input box appears. Continue with step 7.
The password is required for turning off memory reception mode
or changing the start/end times. Enter a 4-digit number.
To specify no password, press the Select key without specifying a
password.
2-29