Konica Minolta bizhub C25 Facsimile Manual page 62

5
Specify the fax number of the recipient.
d
Refer to "Specifying a Recipient" on page 3-9.
d
To send a broadcast transmission to multiple destinations, refer to
"Sending a Fax to Multiple Recipients (Broadcast Transmission)"
on page 3-14.
6
Press the Start key to begin scanning and sending the fax.
d
To stop the transmission, press the Stop/Reset key. A message
appears, requesting confirmation to cancel the setting. Select
[YES], and then press the Select key.
d
If [FAX TX] in [ADMIN. MANAGEMENT]/[PASSWORD SETTING]/
[FULL FUNC. NO.] has been restricted, type in the number speci-
fied for [FULL FUNC. NO.] after pressing the Start key.
d
The transmission method returns to the default setting after the
document is scanned with a normal transmission or after trans-
mission with a manual transmission. It is useful if the most fre-
quently used transmission method is selected as the default. For
details, refer to "FAX TX OPERATION Menu" on page 2-19.
Memory Transmission and Direct Transmission 3-21