Konica Minolta bizhub C25 Facsimile Manual page 93

8
Press the + or , key to select an item whose settings have already been
specified.
–
To specify batch transmission settings, select [BATCH TIME], press
the Select key, and then continue with step 9.
–
To specify the modem speed, select [MODEM SPEED], press the
Select key, and then continue with step 10.
9
Use the keypad to type in the batch transmission time, and then press
the Select key.
The batch transmission settings are specified. Continue with step 11.
d
For details on entering/editing text and the characters that can be
entered, refer to "Entering Text" on page 9-4.
10
Press the + or , key to select the desired modem speed, and then press
the Select key.
The modem speed is specified. Continue with step 11.
d
If a transmission error occurs, select 14.4 or 9.6 for the modem
speed.
11
Press the Back key.
12
Press the Select key.
The entered information is registered with the speed dial number.
d
To return to the Fax mode screen, press the Back key until the
Fax mode screen appears, or press the Stop/Reset key.
6-6 Speed Dialing