Error Messages On The Message Window - Konica Minolta bizhub C25 Facsimile Manual

Error Messages on the Message Window

Error message
ADMINISTERED BY
PC
PLEASE WAIT!
COMMUNICATION
ERROR (####)
Check Fax Mode
HUNG UP THE
PHONE
LINE PROBLEM
CHECK LINE
MEMORY FILE FULL
Error Messages on the Message Window
Cause
This machine is access-
ing LSU or the Admin.
Mode of PageScope
Web Connection.
- Communication is not
possible because of
some problem in the
machine.
- Communication is not
possible because of a
problem with the
recipient/caller's fax
machine.
A fax error occurred
while an operation was
being performed in
Copy mode or Scan
mode.
The receiver of the con-
nected telephone is
lifted.
- The telephone dial-
ing system or tele-
phone wiring system
is not set correctly.
- The telephone cable
is not attached cor-
rectly.
The number of items
registered in the mem-
ory has exceeded the
maximum allowed.
Solution
- Log off from PageScope Web
Connection.
- Exit LSU.
- If no operation is performed
for 600 seconds, the main
screen appears.
Check the transmission results.
Press the Fax key to check the
error condition, and take appro-
priate measures.
Replace the receiver of the con-
nected telephone on the hook.
- Check the telephone dialing
system or telephone wiring
system and use the appropri-
ate configuration menu to
make the correct settings.
- Correctly connect the tele-
phone cable.
If [MEMORY RX MODE] is set to
[ON], cancel memory reception
mode, and print received docu-
ments stored in the memory.
8-5