Setting Up The Memory Rx Mode - Konica Minolta bizhub C20/C20X Facsimile Manual

Setting Up the Memory RX Mode

1
Press the + or , key to select UTILITY, and then press the Select key.
2
Press the + or , key to select FAX RX OPERATION, and then press the
Select key.
3
Check that MEMORY RX MODE is selected, and then press the Select key.
4
Using the + or , keys, select
5
Use the keypad to type in the time when memory reception mode begins,
and then press the Select key.
The ending time input box appears.
To specify no start time, press the Select key without specifying a
time.The password input box appears. Continue with step 7.
6
Use the keypad to type in the time when memory reception mode ends,
and then press the Select key.
The password input box appears.
7
Enter the password, and then press the Select key.
Memory reception mode is set.
The password is required for turning off memory reception mode or
changing the start/end times. Enter a 4-digit number.
To specify no password, press the Select key without specifying a
password.
Specifying Settings in Utility Menu
, and then press the Select key.
ON
35