Ericsson BUSINESSPHONE 250 - MANUAL 2 Manual page 84

AUDIBLE ADJUSTMENTS
HANDSET AND
LOUDSPEAKER
VOLUME
RINGING SIGNAL
ringing
11 Nov 10:35
C= 0 I= 0
RINGING - CHANGE
Ringing type
Clear
Use the volume keys. You can set different volume
levels for internal and external calls and for back
ground music. During a call, adjust handset listening
volume in handset mode. Adjust loudspeaker volume
in monitor mode or during background music.
Press to change the volume
By programming, you can adjust ringing type (2 types), ring-
ing volume (10 steps) and ringing character (10 characters).
prog
Press (see display)
Press (see display)
Now you can select ringing type, volume or character.
type volume
Select type 1 if you want the set ringing volume at a constant
level, select type 2 if you want gradually increasing volume
when the phone rings.
type
Press (see display)
next
Press to change (see display)
You will hear the selected type.
Press to finish the procedure
Note: When type 2 is selected, the programming of the ringing
volume is not applicable.
+15°^| | OPERATOR
| |
| |
character
84
200
return
BusinessPhone 250 - Operator´s Console
BusinessPhone 50 - Operator´s Console