Ericsson BUSINESSPHONE 250 - MANUAL 2 Manual page 73

Select ringing character
enter
Clear
Example :
11 Nov 10:35
C= 0 I= 0
PHONE PROGRAMMING
11 Nov 10:35
C= 0 I= 0
NAMECALL
change
(continued)
Select ringing character (0-4)
See section "Function codes and required data".
Press (see display)
Press to finish programming
After approximately 10 seconds, the function key is active.
You want to supervise extension 234 on a programmable key
with one delayed ringing signal. For available function codes,
see section "Function codes and required data".
prog
Press (see display)
+15°^| | OPERATOR
key short-no.
key
Press (see display)
Press the desired programmable key
The pre-programmed function is displayed.
+15°^| | OPERATOR
Press (see display)
| |
| |
settings
| |
| |
change
73
PROGRAMMING
200
ringing
200
return
BusinessPhone 250 - Operator´s Console
BusinessPhone 50 - Operator´s Console