Ericsson BUSINESSPHONE 250 - MANUAL 2 Manual page 19

OPERATOR HOLD
Hold
Hold
Speech
Hold
INDIVIDUAL HOLD
Loop 1
Loop 1
Speech
Several incoming calls can be put on hold using this function.
You have speech connection with the caller.
Press (pre-programmed)
The call is put on hold. The key lamp shows a steady light.
You can answer new incoming calls and also put calls on
hold by pressing the key again during an ongoing call.
When you want to retake one of the calls on hold, you
must be free from ongoing calls:
Press (pre-programmed)
The oldest call on hold is shown in the display.
Press to retake
The call is retaken. The "Hold"-key lamp remains lit if more
calls are still on hold.
or
Press (pre-programmed)
The call is put on hold again. The next call on hold is
shown. Repeat until the required call is shown.
When all calls are retaken the key lamp extinguishes.
Incoming calls can be put on hold for retake.
You have speech connection with the caller.
Press any free loop key
The key lamp shows steady light. The call is put on hold.
You can answer new incoming calls or put new calls on hold.
Press again
The loop key light extinguishes.
Press
The call is retaken.
19
DURING CALLS
BusinessPhone 250 - Operator´s Console
BusinessPhone 50 - Operator´s Console