Ericsson BUSINESSPHONE 250 - MANUAL 2 Manual page 35

RECEIVE MESSAGE
Message
11 Nov 10:35
C= 0 I= 0
SELECT FUNCTION
Receive
receive
Sent-back
sent-back
Message
The message lamp flashes rapidly.
Press to view mailbox
The display shows if there are new messages. It also shows if
any of your messages are sent back, when they have been left
unanswered too long.
+15°^| |
send receive
Press (see display)
See the display on how to call back, listen to or read and
then erase messages that are sent to you.
Note: Depending on the configuration, you might be asked for
your personal code before you can retrieve your messages.
See section "Security".
Press (see display)
Messages that have been left unanswered too long are sent
back to you, the display message "sent-back" appears.
You can check the returned message by selecting sent-back.
To erase the message or send it again (see display).
Press to finish the procedure
INTERNAL MESSAGES
| |
| |
check sent-back
35
BusinessPhone 250 - Operator´s Console
BusinessPhone 50 - Operator´s Console