Error Of Network Scan - Konica Minolta bizhub 215 User Manual

9.2

Error of network scan

9.2 Error of network scan
Tips
- Network scan requires the machine to have either optional Network Card NC-504 or Image Controller
IC-209 and Extended Operation Panel MK-733 installed.
Message
[COMMUNICATION ERROR]
[XXXX Server]
[CANNOT CONNECT]
[XXXX Server]
[CANNOT GET IP]
[XXXX Server]
[DISCONNECT]
[XXXX Server]
[WRONG PASSWORD]
[XXXX Server]
[MEMORY FULL]
[MEMORY FILE FULL]
[SERVER MEMORY FULL]
[SMTP Server]
[XXX SERVER ERROR]
bizhub 215
Cause
Communication with the server
failed due to a problem in the
machine or the unavailability of
the network or server.
A connection with the server
could not be established.
An IP address could not be ob-
tained from the DNS server.
The connection with the server
has been severed.
Login to the server failed due to
use of an incorrect password.
Image data has caused a memo-
ry overflow during E-mail trans-
mission.
The maximum number of files
has been used during E-mail
transmission.
A memory overflow occurred in
the SMTP server during E-mail
transmission.
Scanned data could not be cor-
rectly uploaded to the FTP serv-
er or the SMB server.
Correction action
Check the communication result
report.
Contact your network adminis-
trator.
Make sure that the Ethernet ca-
ble is correctly connected.
Check the settings of each serv-
er and network.
Contact your network adminis-
trator.
Contact your network adminis-
trator.
Contact your network adminis-
trator.
Check the POP3 server settings.
Contact your network adminis-
trator.
Remove the transmitted data
stored in the memory.
Remove the transmitted data
stored in the memory.
Contact your network adminis-
trator.
Contact your network adminis-
trator.
9
9-3