[Scan Type]; [Image Size]; [Lan/Usb]; [About] - Konica Minolta bizhub 215 User Manual

3.2 TWAIN driver

[Scan Type]

A scanning method can be selected.
- [Pull Scan]: Click the driver [Scan] button, then this machine starts scanning.
- [Push Scan]: Press Start on the Control Panel, then this machine starts scanning.

[Image Size]

Displays the size of the scanned image.

[LAN/USB]

Connection method can be selected.
- If network is selected, an IP address can be set or changed by following procedures shown below:
1
Select [Network].
2
Enter an IP address to be newly registered or changed.
% Click [Search], then an IP addresses of devices connected to the network will be displayed. Select
the pertinent IP address, then click [OK].
3
When an IP address is set up, click [OK].

[About]

The version information screen appears.

[Scan]

Scan the original.

[Close]

Stops scanning.

[Clear]

Deletes images scanned using pre-scanning.

[Prescan]

Pre-scans the original and displays it in the pre-scan window.

[Unit]

Select a display unit from the drop-down list.

[Help]

The Help screen appears.
bizhub 215
3
3-5