5.2
Changing transmission setting
2
Press +,, then select the address to be checked or corrected.
% Press Clear/Stop to display the Delete screen. Press +, to select [YES], then press OK. The se-
lected address is deleted and the CC address list screen is displayed. To continue deleting address-
es, repeat this procedure.
% Press OK to display only the selected addresses. Press Clear/Stop and delete the address char-
acter by character. After deleting all characters, press OK, then the Delete screen appears. Press
+, to select [YES], then press OK. The selected address is deleted and the CC address list screen
is displayed. To continue deleting addresses, repeat this procedure.
3
In the CC address list screen, press RETURN.
The [ADD] and [CHECK/EDIT] screen of CC address appears.
4
Press +, to select [RETURN], then press OK.
The screen returns to the other setting screen.
5.2.3
Setting file format
1
Press the Scan key.
The machine switches to the scan mode.
2
Set the original and enter the destination address.
[OTHER SETTING=,] is displayed.
3
Press ,.
The other setting screen appears.
4
Press +, to select [IMAGE FORMAT], then press OK.
5
Press +,, then select file format.
% The file format can be selected from [TIFF], [PDF], or [JPEG].
% If [Color Setting] for [Quality] is set to [BW], [JPEG] is not displayed.
6
Press OK.
The screen returns to the other setting screen.
5.2.4
Setting compression coding method
1
Press the Scan key.
The machine switches to the scan mode.
2
Set the original and enter the destination address.
[OTHER SETTING=,] is displayed.
3
Press ,.
The other setting screen appears.
4
Press +, to select [BW CODING METHOD], then press OK.
5
Press +,, then select compression coding method.
% Compression coding method can be selected from [MH], [MR], or [MMR].
6
Press OK.
The screen returns to the other setting screen.
bizhub 215
5
5-7