Wia Driver; How To Scan Originals; Setting Driver - Konica Minolta bizhub 215 User Manual

3.3

WIA driver

3.3 WIA driver
This section describes the functions of the WIA driver.
3.3.1

How to scan originals

Scanning is enabled using a WIA-compliant application. The operation method differs depending on the ap-
plication to be used. This section describes the operation by using Adobe Photoshop 6.0.
1
Set an original to be scanned on the ADF or Original Glass.
2
Start an application software (Adobe Photoshop, etc.) on the computer.
3
Click [File].
4
Select [Import], then click [WIA-KONICA MINOLTA <model_name> Scanner].
% If a message dialog appears, check the contents and click [OK].
5
Make the necessary setting for scanning.
% For details, refer to page 3-9.
6
Click [Scan].
Press this key to start scanning.
% To stop scanning, press the [Cancel] or Esc key.
3.3.2

Setting driver

No. Item
1 [Paper Source]
2 [Color picture]
3 [Grayscale picture]
4 [Black and white picture
or text]
5 [Custom settings]
6 [Adjust the quality of the
scanned picture]
bizhub 215
1
2
3
4
5
6
7
Settings
Select the scanning method. To use the ADF, select [Document Feed-
er]. To set to Original Glass, select [Flatbed].
Scans the original in color mode.
[Brightness]: 0
[Contrast]: 0
[Resolution]: 150
Scans the original in gray scale mode.
[Brightness]: 0
[Contrast]: 0
[Resolution]: 150
Scans the original in black and white mode.
[Brightness]: 0
[Resolution]: 150
Scans the original by adjusting the settings.
Image quality can be adjusted.
3
8
9
10
3-9