Setting Up Iprint On Your Server; Installing Iprint - Novell NETWARE 6-DOCUMENTATION Manual

2

Installing iPrint

Setting Up iPrint on Your Server

iPrint is based on the Novell
architecture. In order to use iPrint, you must have NDPS installed and
configured. If you do not have an NDPS system set up, refer to the
Distributed Print Services Administration Guide
The following sections will assist you in preparing NDPS to work with iPrint
"Installing iPrint" on page 13
"iPrint System Requirements" on page 14
"Setting Up DNS for the Print Services Manager" on page 14
"Configuring iPrint" on page 15
If you chose to install iPrint/NDPS during the NetWare
software components were automatically installed on the server. If iPrint was
not installed during the installation, you need to install it by completing the
following steps.
1
From the GUI screen on the server, click Novell > Install.
2
If an iPrint/NDPS entry is listed, iPrint is already installed. If an entry
does not exist, click Add.
3
Insert the NetWare 6 Operating System CD into the drive.
4
Browse to the PRODUCT.NI file at the root of the CD.
5
Follow the installation prompts to install iPrint/NDPS.
®
Distributed Print Services
Setting Up iPrint on Your Server
®
(NDPS )
TM
Novell
for more information.
®
6 installation, iPrint
13