Novell NETWARE 6-DOCUMENTATION Manual page 896

Creating Log and Error Files
Setting the Location of Backup Log and Error Files
96
Storage Management Services Administration Guide
4
Double-click the preferred queue.
5
Double-click Servers.
6
Right-click the preferred server.
7
Select Error Report.
If you do not know what is on the media, or you have lost or deleted the log
and error files, you can re-create them.
Ensure that you have met the prerequisites detailed in
SBCON Tasks" on page
To create a log or error file, see
Every time you do a backup, you are required to set a location (or directory
path) for the log and error files. The restore log and error files are always
located in the directory, SYS:SYSTEM/TSA/RESTORE.
You can set the location when requested in the backup procedures, or you can
use the following method prior to beginning the backup procedures.
Ensure that you have met the prerequisites detailed in
SBCON Tasks" on page
1
From the SBCON Main Menu, select Log File Administration > Set
Location of Log and Error Files.
2
Set the location using one or more of the following methods:
Press Enter to accept the default location, and then press Esc to return
to the Main Menu.
Press Insert to select from a list of network directories, select a
directory, and press Esc twice to return to the Main Menu.
Press Backspace over the path shown (or a portion of the path), type
a new directory or path, press Enter, and then press Esc to return to
the Main Menu.
You can also press Insert during this process to select existing parts
of the path from a list.
3
Press Esc when finished to return to the Main Menu.
81.
"Creating Session Files" on page
81.
"Prerequisites for
98.
"Prerequisites for