Manual Installation Using Smartstart - Compaq ProLiant 1600 Administrator's Manual

Manual Installation Using SmartStart

To perform a manual installation perform the following steps:
IMPORTANT: Power off Node2 when setting up Node1
1. Power up the shared storage. Place the SmartStart CD in the CD-ROM
drive of the cluster node.
2. Follow the steps on the SmartStart Setup Poster, making sure you select
Manual Configuration as the SmartStart installation path.
3. Select Microsoft Windows NT Server 4.0/Enterprise Edition (Retail)
or Microsoft Windows NT Server 4.0/Enterprise Edition (Select) as
the operating system. The edition of Windows NT that you select will be
determined by the version of the software you have.
4. After this process is complete, restart the computer.
5. When you restart the computer, SmartStart will automatically create
your system partition.
IMPORTANT: Node2 Exception: When configuring Node2, the Array Configuration Utility
shows the results of the shared drives configured during Node1 setup. Accept these
changes for Node2 by exiting.
NOTE: Create a logical drive with 100MB of space to be used as the quorum disk.
6. Next, SmartStart will automatically run the Array Configuration Utility.
Refer to the Compaq StorageWorks RAID Array 4000 User Guide for
instructions about creating RAID sets.
IMPORTANT: Node2 Exception: When configuring Node2, exit out of the Diskette Builder
Utility, remove SmartStart CD and go to step 12.
7. After you have completed using the Array Configuration Utility, the
system will reboot and present a menu screen. Choose to run Create
Support Software. This will load the Diskette Builder Utility. After the
Diskette Builder Utility has loaded, create the Options ROMPaq utility,
and Compaq Software Support Disk (SSD). Label the diskettes you
create. The Options ROMPaq utility updates the firmware on the array
controllers and the hard drives. For more information about Options
ROMPaq, refer to the Compaq StorageWorks RAID Array 4000 User
Guide.
8. Exit and remove the SmartStart CD.
Setting Up the Compaq ProLiant Clusters HA/F100 and HA/F200 3-19