Table of Contents
Advertisement
chapter 3
Installation for Windows
Introduction
The installation of your WL110 Wireless PC Card for
Windows consists of the following steps:
1. Insert the CD-ROM to install the Client Manager
software (see page 3-2).
2. Insert your WL110 Wireless PC Card (see page 3-3).
3. Install drivers (see page 3-4).
4. Set the wireless LAN properties (see page 3-8).
5. Finish installation (see page 3-14).
Note: If you intend to use the WL110 PC Card in the
WL510 Wireless Enterprise Access Point, please
refer to the documentation that was shipped with the
device. Alternatively you can download these
Installation for Windows 3-1
Advertisement
Table of Contents
